ASRock Rack X570D4I-2T server motherboard with AMD AM4 Socket Ryzen 3rd Generation Series processor support and ASPEED AST2500 on-board graphics. Supports 4x DDR4 ECC and non-ECC SODIMM (up to 128GB), 1x Type 2280 M.2 (SATA/NVMe), 8x SATA 6Gbps through 2x OCulink storage expansion ports (1 cable provided for 4x SATA). Integrated IPMI 2.0 with KVM and Dedicated RTL8211E LAN, PCIe Gen4x16 link (Matisse) and 2x Intel X550-AT RJ45 10GLAN.

Rear Panel Connectors: 1x VGA Port (D-Sub); 2x USB 3.1 Gen2 Port; 2x 10G LAN Ports (RJ45); 1x Dedicated Realtek RTL8211E Management LAN (RJ45); 1x UID Button & LED.

Board Expansion: 1x PCI Express 4.0 x16 Slot (with Matisse or PCI-E 3.0 x8 with Picasso processors); 1x Type 2280 M.2 socket (supporting Gen4 x4 (64 Gb/s) with Matisse or Gen3 x4 (32 Gb/s) with Picasso 'G' processors); 8x SATA 6Gb/s ports available through OCulink storage expansion ports (1 cable provided, additional cable required for ports 5-8).

Integrated Graphics: This board has basic integrated ASPEED AST2500 VGA graphics. A GPU is not required.

Suitable Processors: The ASRock X570D4I-2T board supports various 3rd Generation AMD AM4 socket Ryzen series processors. The ASRock X570D4I-2T is not provided with a processor. Suitable processors are available in the 'you may also require' section to the left. We recommend a max. of 65W if fitting into a 1U chassis.

Supported Processors: Picasso Ryzen 3: 3200GE, 3200G, 3200G PRO; Picasso Ryzen 5: 3400GE, 3400G; Matisse Ryzen 5: 3600, 3600 PRO, 3600X; Matisse Ryzen 7: 3700X; Matisse Ryzen 9: 3900X, 3950X.

Intel 115X Compatible Coolers: The X570D4I-2 supports Intel 115X compatible coolers. The cooler provided with your AMD CPU will not fit. An Intel cooler is also required. A threaded metal 115X backplate is attached to the motherboard - in most cases this will need to be carefully removed to fit a heatsink (do not lever this off with a metal object!).

Board Connectors: 1x Serial COM Header; 1x M.2 (M-key, 2280, Supports PCIe 4.0 x4 or SATA3 6.0Gb/s); 2x OCuLink (4xSATA3 6.0Gbs/PCIe 4.0x4 for each); 1x Auxiliary Panel Header (includes Caseopen, sys_fault_LED, 2FLANLED); 1x TPM Header; 1x IPMB Header; 3x Fan Headers (4-pin); 1x USB 3.1 (Gen1) Header (supports 2x USB 3.0); 1x Front Panel (RST, PWRBTN, HDDLED, PWRLED); 1x Speaker Header; 1x SMBUS from BMC; Power Connector (8pin (DC-IN); 4pin (ATX); 4pin (HDD PWR)); 1x Clear CMOS; 1x PSU SMB Header.

Powering from ATX Power Supply: This board can be powered from a standard ATX power connector by connecting the PSU's 24-pin ATX connector to the board's 4-pin ATX4PIN1 connector using the provided 24-pin to 4-pin ATX adaptor cable AND connecting the PSU's 12V 4-pin ATX power connector to the board's 8-pin ATX12V2 connector. These connectors are both next to the CMOS Battery. Please check with our photos before powering your board.

Powering from 12V DC: This board can be powered from a regulated 12V DC power source through the 8-pin 12V power connector (ATX12V2). A cable is provided to power up to 6x SATA devices from the 4-pin SATAPWR1 connector on the board, when using DC-IN Mode. The SATAPWR1 connector is close to the PCIe slot, next to the Oculink connectors.

Fitting Memory: No picture on power up? 1 or 2 modules can only be fitted in particular configurations. The SODIMM slots are numbered B1, B2, A1, A2 from the outside of the board inwards. Use A1 or A2 for 1 module. Use A1+B1, or A1+A2 or B1+B2 for 2 modules.

Memory Compatibility: This board is very(!) particular with memory. We recommend using either memory listed on the official QVL, or purchased directly from us. Incompatible memory will give no picture, or kernel panics/ blue screens on OS installation.

Connecting SATA drives: Change in BIOS: Advanced / Chipset / OCU1 (or OCU2) Mode from PCIE to SATA.

2x USB Connectors: This board only has 2x Type-A USB 3.0 connectors, and 1x USB 3.0 board header. You may want to add a USB 3.0 header cable to Type-A adapter to your order if your case does not have a USB 3.0 header connector. GUI OS installation from USB can be interesting without a mouse!

Suitable Cases: All our Mini-ITX chassis with a suitable power supply, and an appropriate LGA115x heatsink.

Downloads:BIOS, Documentation and Drivers.

Package Contents: X570D4I-2T motherboard, IO Shield, M.2 Screw, 24-pin to 4-pin ATX adaptor cable (power in), 1x Oculink to 4x SATA cable, 1x 4-pin to 6x SATA power cable.

Suitable Memory: The X570D4I-2T Dual Channel Memory Architecture supports DDR4 Non-ECC and ECC memory up to 128GB in 4x slots. A Ryzen PRO CPU may be required to support ECC memory (to be determined). DDR4 is not compatible with other types of DDR memory. Fully tested DDR4 DIMMs are available in the 'you may also require' section to the left.